| Manufacturing Company: KYK Co. Ltd.
|
|
Name of Model:
KYK 3000 |
| Mfg/Product Approval Code:
2213/07-667 |
|
Water supply type:
Direct connection to tap water |
| Warranty:
5
years parts and labor. |
|
Standard voltage:
110V, 50-60Hz, 220V also available |
| Electrical consumption:
150W |
|
Size:
13.4 (W) x 13.4 (H) x 7.25 (D)
|
| Weight:
8.8 pounds |
|
Installation Position:
Countertop and wall mounted
|
| Water Supply Type:
Faucet diverter connection |
|
pH
Range:
Approximately 2.5 - 12 pH (4-10 pH preset)
This is not a super acid
|
| Controlling Method: Touch |
|
Temperature
Range:
5°C ~ 30°C |
| Available Water Pressure:
1.5~3.0kgf/cm2 |
|
Electrolysis Method:
continuous electrolysis with a flow sensor. |
| LCD Screen:
Displays pH and ORP levels, 7 colors, the water flow rate per minute, “Working” ionization indicator, the filter life for 1st and 2nd filter, auto-diagnosis codes, water purification, and sound. |
|
Handling Capacity:
2L
of alkaline water/minute. 1.5L of acidic
water/minute |
| Electrolysis Ability:
4 levels of Alkaline water, 4 levels of acidic water, filtered only water |
|
Electrolysis Cell:
7 sheets of Platinum coated titanium. |
| Electrode Sheet Wash:
Automatic washing controlled by MyCom. |
|
Filter
Life:
1st
filter: can handle about 6,000ℓ or 6 months, 2nd
filter: can handle 9000 liters or 9 months. |
|
Filtering Material
(Made in Korea):
1st filter: Antibiotic one-side filter, Zeomic, Noxious Odor Calcium, Active Carbon (with silver added), Sediment filter.
2nd filter: Antibiotic one-side filter, Granular Activated Carbon, Active Carbon (with silver added) |
|
Message to indicate Filter Change:
Displays on LCD screen when the filter life
indicator reaches 7000 liters. Even if the taste and smell of water is not normal, you should change the filter anyway. |
| Over-Current Detector:
Automatically stops the output of electrolytic
cells once over current is detected. |
|
Calcium addition:
adding calcium for forced dissolution. |
| Over-Current Detector:
Automatically stops the output of electrolytic
cells once over current is detected. |
|
Over Temperature Protector:
the temperature detector circuit installed
inside the SMPS automatically stops the device
once a temperature abnormality is detected. |
| Power Source Protector:
Fuse |
|
Return
Policy:
60 Day
Money Back on this model |