Affordable-Water-Ionizers.com Is Affordable Nutrition For All

FAR INFRARED ARM & LEG WRAPS
FOR TARGETS RESULTS

Order Now

•	Relaxes the Muscles
•	Decreases Muscle Spasm
•	Decreases Stiffness in Tendons
•	Decreases Stiffness in Ligaments
•	Lessens Pain
•	Supplements a Weight Loss program

These wraps are for the arms and lower leg. They harness Infrared thermal energy and use it to penetrate target areas of the body such as arms and lower legs. Designed for safety: soft waterproof fabric with flexible tensile capabilities whatever the sitting or standing position. Safe heating circuits are designed to withstand any stretches or bends. This system adopts space-age Infrared carbon-fiber technology together with an advanced electronic control system. Allows easy adjustment of temperatures and times for individual needs in one or both wraps simultaneously.

INFRARED SLENDER LIMB WRAP COMPOSITION AND FUNCTIONS:

INFRARED SLENDER LIMB WRAP LOW VOLTAGE MODEL (ANP56A) CONTROLS:

HOW TO USE INFRARED SLENDER LIMB WRAP:

1. Strap the Far Infrared Limb Wrap around the chosen body part (arm, lower leg, thigh). The Far Infrared Limb Wrap should completely surround your body without becoming creased, doubled over or folded. To achieve the heating effect, do not strap the Far Infrared Limb Wrap on too tightly. 2. Check to see if your household voltage is the same as that printed on the plug before plugging the device in. 3. Connect the Far Infrared Limb Wrap to control box (either one Wrap in one connection, or both wraps in both connections) and plug in. 4. Press the power switch on, then press ON/OFF button. The red power indicator will be on, and the temperature and time digital LCD displays a default setting: temperature: 42°C, time:40min

5. Press "+" and "-" to adjust temperature (30°C ~ 60°C) and time (0-95min) 6. Press Start to heat. 7. At the end of the session, towel off the sweat and wait 15 or 20 minutes before showering or having a bath, eating or drinking cold drinks. Do not worry if your skin is reddish: this reaction is due to the constant temperature it has been exposed to and will disappear after a couple of hours. 8. Once you have finished your session, take off the Far Infrared Limb Wrap and spread it out on a flat surface until it cools down. Then clean it with a damp cloth and dry it. Store in a dry place.

INFRARED LIMB WRAPS HIGH VOLTAGE MODEL (PH2K):

Infrared Limb Wrap High Voltage Model Control Panel

ON/OFF  Switches the system 'ON' or 'OFF'  Channel Key Selects the respective body zones (1-2-3-4). One or more zones can be targeted in a thermal session.  Temperature Key Press to increase or press to decrease the temperature from 30 °C - 60°, 1 °C for   each time pressed.  Timer Key Press to increase or press to decrease the time from 5 ~ 95 minutes, 5 minutes for each time pressed.  Overload Display Overload indicator lights when the power surpasses 300W, and the alarm buzzer will sound.  Start/Stop Key Press Start/Stop key to start or stop the device after setting the   temperature and timer.

INFRARED LIMB WRAPS TECHNICAL SPECIFICATIONS:

Voltage  AC100 -120V 60W  Material  Nylon, Space Carbon Fiber  Dimensions (End to End)  Width x Length : 43 x 50 (cm) / 17.2 x 20 (inches)  Temperature  30°C ~ 60°C * (Actual temperature may vary when in use)  Timer  0-95 Min  Net Weight  400 g / 0.082 lb (Each Wrap)  Package Info  Width x Length x Height: 19 x 30 x 26 (cm) / 7.6 x 12 x 10.4 (inches)  Weight: 2315 g / 5.1lb  Limb Wrap X 2 ( can be used on arms or calves)  Control Box X 1  Manual X 1

Order Now

Understanding Far Infrared Technology